This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 4240
Internet Engineering Task Force (IETF)                      M. Bjorklund
Request for Comments: 7407                                Tail-f Systems
Category: Standards Track                               J. Schoenwaelder
ISSN: 2070-1721                                        Jacobs University
                                                           December 2014


                A YANG Data Model for SNMP Configuration

Abstract

   This document defines a collection of YANG definitions for
   configuring SNMP engines.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7407.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................3
   2. Data Model ......................................................3
      2.1. Tree Diagrams ..............................................4
      2.2. General Considerations .....................................4
      2.3. Common Definitions .........................................4
      2.4. Engine Configuration .......................................5
      2.5. Target Configuration .......................................6
      2.6. Notification Configuration .................................7
      2.7. Proxy Configuration ........................................8
      2.8. Community Configuration ....................................8
      2.9. View-Based Access Control Model Configuration ..............9
      2.10. User-Based Security Model Configuration ..................10
      2.11. Transport Security Model Configuration ...................11
      2.12. Transport Layer Security Transport Model Configuration ...12
      2.13. Secure Shell Transport Model Configuration ...............13
   3. Implementation Guidelines ......................................14
      3.1. Supporting read-only SNMP Access ..........................15
      3.2. Supporting read-write SNMP Access .........................15
   4. Definitions ....................................................16
      4.1. Module 'ietf-x509-cert-to-name' ...........................16
      4.2. Module 'ietf-snmp' ........................................22
      4.3. Submodule 'ietf-snmp-common' ..............................24
      4.4. Submodule 'ietf-snmp-engine' ..............................28
      4.5. Submodule 'ietf-snmp-target' ..............................32
      4.6. Submodule 'ietf-snmp-notification' ........................36
      4.7. Submodule 'ietf-snmp-proxy' ...............................41
      4.8. Submodule 'ietf-snmp-community' ...........................44
      4.9. Submodule 'ietf-snmp-vacm' ................................49
      4.10. Submodule 'ietf-snmp-usm' ................................55
      4.11. Submodule 'ietf-snmp-tsm' ................................60
      4.12. Submodule 'ietf-snmp-tls' ................................63
      4.13. Submodule 'ietf-snmp-ssh' ................................68
   5. IANA Considerations ............................................71
   6. Security Considerations ........................................72
   7. References .....................................................75
      7.1. Normative References ......................................75
      7.2. Informative References ....................................75
   Appendix A.  Example Configurations ...............................78
     A.1.  Engine Configuration Example ..............................78
     A.2.  Community Configuration Example ...........................78
     A.3.  User-Based Security Model Configuration Example ...........79
     A.4.  Target and Notification Configuration Example .............81
     A.5.  Proxy Configuration Example ...............................82

     A.6.  View-Based Access Control Model Configuration Example .....85
     A.7.  Transport Layer Security Transport Model Configuration
           Example ...................................................87
   Acknowledgments ...................................................88
   Authors' Addresses ................................................88

1.  Introduction

   This document defines a YANG [RFC6020] data model for the
   configuration of SNMP engines.  The configuration model is consistent
   with the MIB modules defined in [RFC3411], [RFC3412], [RFC3413],
   [RFC3414], [RFC3415], [RFC3417], [RFC3418], [RFC3419], [RFC3584],
   [RFC3826], [RFC5591], [RFC5592], and [RFC6353] but takes advantage of
   YANG's ability to define hierarchical configuration data models.

   The configuration data model in particular has been designed for SNMP
   deployments where SNMP runs in read-only mode and the Network
   Configuration Protocol (NETCONF) is used to configure the SNMP agent.
   Nevertheless, the data model allows implementations that support
   write access both via SNMP and NETCONF in order to interwork with
   SNMP management applications manipulating SNMP agent configuration
   using SNMP.  Further details can be found in Section 3.

   The YANG data model focuses on configuration.  Operational state
   objects are not explicitly modeled.  The operational state of an SNMP
   agent can be accessed either directly via SNMP or, alternatively, via
   NETCONF using the read-only translation of the relevant SNMP MIB
   modules into YANG modules [RFC6643].

   This document also defines a YANG data model for mapping an X.509
   certificate to a name.

   The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119].

2.  Data Model

   In order to preserve the modularity of SNMP, the YANG configuration
   data model is organized in a set of YANG submodules, all sharing the
   same module namespace.  This allows adding configuration support for
   additional SNMP features while keeping the number of namespaces that
   have to be dealt with down to a minimum.

2.1.  Tree Diagrams

   A simplified graphical representation of the data model is used in
   this document.  The meaning of the symbols in these diagrams is as
   follows:

   o  Brackets "[" and "]" enclose list keys.

   o  Abbreviations before data node names: "rw" means configuration
      (read-write), and "ro" means state data (read-only).

   o  Symbols after data node names: "?" means an optional node, "!"
      means a presence container, and "*" denotes a list and leaf-list.

   o  Parentheses enclose choice and case nodes, and case nodes are also
      marked with a colon (":").

   o  Ellipsis ("...") stands for contents of subtrees that are not
      shown.

2.2.  General Considerations

   Most YANG nodes are mapped 1-1 to the corresponding MIB object.  The
   "reference" statement is used to indicate which corresponding MIB
   object the YANG node is mapped to.  When there is not a simple 1-1
   mapping, the "description" statement explains the mapping.

   The persistency models in SNMP and NETCONF are quite different.  In
   NETCONF, the persistency is defined by the datastore, whereas in
   SNMP, it is defined either explicitly in the data model or on a row-
   by-row basis using the Textual Convention "StorageType".  Thus, in
   the YANG model defined here, the "StorageType" columns are not
   present.  For implementation guidelines, see Section 3.

   In SNMP, row creation and deletion are controlled using the Textual
   Convention "RowStatus".  In NETCONF, creation and deletion are
   handled by the protocol, not in the data model.  Thus, in the YANG
   model defined here, the "RowStatus" columns are not present.

2.3.  Common Definitions

   The submodule "ietf-snmp-common" defines a set of common typedefs and
   the top-level container "snmp".  All configuration parameters defined
   in the other submodules are organized under this top-level container.

2.4.  Engine Configuration

   The submodule "ietf-snmp-engine", which defines configuration
   parameters that are specific to SNMP engines, has the following
   structure:

      +--rw snmp
         +--rw engine
            +--rw enabled?               boolean
            +--rw listen* [name]
            |  +--rw name    snmp:identifier
            |  +--rw (transport)
            |     +--:(udp)
            |        +--rw udp
            |           +--rw ip      inet:ip-address
            |           +--rw port?   inet:port-number
            +--rw version
            |  +--rw v1?    empty
            |  +--rw v2c?   empty
            |  +--rw v3?    empty
            +--rw engine-id?             snmp:engine-id
            +--rw enable-authen-traps?   boolean

   The leaf "/snmp/engine/enabled" can be used to enable/disable an SNMP
   engine.

   The list "/snmp/engine/listen" provides configuration of the
   transport endpoints the engine is listening to.  In this submodule,
   SNMP over UDP is defined.  The Secure Shell (SSH) Protocol, Transport
   Layer Security (TLS), and Datagram Transport Layer Security (DTLS)
   are also supported, defined in "ietf-snmp-ssh" (Section 2.13) and
   "ietf-snmp-tls" (Section 2.12), respectively.  The "transport" choice
   is expected to be augmented for other transports.

   The "/snmp/engine/version" container can be used to enable/disable
   the different message processing models [RFC3411].

2.5.  Target Configuration

   The submodule "ietf-snmp-target", which defines configuration
   parameters that correspond to the objects in SNMP-TARGET-MIB, has the
   following structure:

      +--rw snmp
         +--rw target* [name]
         |  +--rw name       snmp:identifier
         |  +--rw (transport)
         |  |  +--:(udp)
         |  |     +--rw udp
         |  |        +--rw ip               inet:ip-address
         |  |        +--rw port?            inet:port-number
         |  |        +--rw prefix-length?   uint8
         |  +--rw tag*       snmp:identifier
         |  +--rw timeout?   uint32
         |  +--rw retries?   uint8
         |  +--rw target-params  snmp:identifier
         +--rw target-params* [name]
            +--rw name    snmp:identifier
            +--rw (params)?

   An entry in the list "/snmp/target" corresponds to an
   "snmpTargetAddrEntry".

   The "snmpTargetAddrTDomain" and "snmpTargetAddrTAddress" objects are
   mapped to transport-specific YANG nodes.  Each transport is
   configured as a separate case in the "transport" choice.  In this
   submodule, SNMP over UDP is defined.  TLS and DTLS are also
   supported, defined in "ietf-snmp-tls" (Section 2.12).  The
   "transport" choice is expected to be augmented for other transports.

   An entry in the list "/snmp/target-params" corresponds to an
   "snmpTargetParamsEntry".  This list contains a choice "params", which
   is augmented by submodules specific to the security model, currently,
   "ietf-snmp-community" (Section 2.8), "ietf-snmp-usm" (Section 2.10),
   and "ietf-snmp-tls" (Section 2.12).

2.6.  Notification Configuration

   The submodule "ietf-snmp-notification", which defines configuration
   parameters that correspond to the objects in SNMP-NOTIFICATION-MIB,
   has the following structure:

      +--rw snmp
         +--rw notify* [name]
         |  +--rw name    snmp:identifier
         |  +--rw tag     snmp:identifier
         |  +--rw type?   enumeration
         +--rw notify-filter-profile* [name]
            +--rw name       snmp:identifier
            +--rw include*   snmp:wildcard-object-identifier
            +--rw exclude*   snmp:wildcard-object-identifier

   This submodule also augments the "target-params" list defined in the
   "ietf-snmp-target" submodule (Section 2.5) with one leaf:

      +--rw snmp
         +--rw target-params* [name]
            ...
            +--rw notify-filter-profile?   leafref

   An entry in the list "/snmp/notify" corresponds to an
   "snmpNotifyEntry".

   An entry in the list "/snmp/notify-filter-profile" corresponds to an
   "snmpNotifyFilterProfileEntry".  In the MIB, there is a sparse
   relationship between "snmpTargetParamsTable" and
   "snmpNotifyFilterProfileTable".  In the YANG model, this sparse
   relationship is represented with a leafref leaf
   "notify-filter-profile" in the "/snmp/target-params" list, which
   refers to an entry in the "/snmp/notify-filter-profile" list.

   The "snmpNotifyFilterTable" is represented as a list "filter" within
   the "/snmp/notify-filter-profile" list.

   This submodule defines the feature "notification-filter".  A server
   implements this feature if it supports SNMP notification filtering
   [RFC3413].

2.7.  Proxy Configuration

   The submodule "ietf-snmp-proxy", which defines configuration
   parameters that correspond to the objects in SNMP-PROXY-MIB, has the
   following structure:

      +--rw snmp
         +--rw proxy* [name]
            +--rw name                    snmp:identifier
            +--rw type                    enumeration
            +--rw context-engine-id       snmp:engine-id
            +--rw context-name?           snmp:context-name
            +--rw target-params-in?       snmp:identifier
            +--rw single-target-out?      snmp:identifier
            +--rw multiple-target-out?    snmp:identifier

   An entry in the list "/snmp/proxy" corresponds to an
   "snmpProxyEntry".

   This submodule defines the feature "proxy".  A server implements this
   feature if it can act as an SNMP proxy [RFC3413].

2.8.  Community Configuration

   The submodule "ietf-snmp-community", which defines configuration
   parameters that correspond to the objects in SNMP-COMMUNITY-MIB, has
   the following structure:

      +--rw snmp
         +--rw community* [index]
            +--rw index            snmp:identifier
            +--rw (name)?
            |  +--:(text-name)
            |  |  +--rw text-name?       string
            |  +--:(binary-name)
            |     +--rw binary-name?     binary
            +--rw security-name    snmp:security-name
            +--rw engine-id?       snmp:engine-id
            +--rw context?         snmp:context-name
            +--rw target-tag?      snmp:identifier

   This submodule also augments the "/snmp/target-params/params" choice
   with nodes for the Community-based Security Model used by SNMPv1 and
   SNMPv2c:

      +--rw snmp
         +--rw target-params* [name]
         |  ...
         |  +--rw (params)?
         |     +--:(v1)
         |     |  +--rw v1
         |     |     +--rw security-name    snmp:security-name
         |     +--:(v2c)
         |        +--rw v2c
         |           +--rw security-name    snmp:security-name
         +--rw target* [name]
            +--rw mms?       union

   An entry in the list "/snmp/community" corresponds to an
   "snmpCommunityEntry".

   When a case "v1" or "v2c" is chosen, it implies an
   snmpTargetParamsMPModel 0 (SNMPv1) or 1 (SNMPv2), and an
   snmpTargetParamsSecurityModel 1 (SNMPv1) or 2 (SNMPv2), respectively.
   Both cases imply an snmpTargetParamsSecurityLevel of noAuthNoPriv.

2.9.  View-Based Access Control Model Configuration

   The submodule "ietf-snmp-vacm", which defines configuration
   parameters that correspond to the objects in SNMP-VIEW-BASED-ACM-MIB,
   has the following structure:

      +--rw snmp
         +--rw vacm
            +--rw group* [name]
            |  +--rw name      group-name
            |  +--rw member* [security-name]
            |  |  +--rw security-name     snmp:security-name
            |  |  +--rw security-model*   snmp:security-model
            |  +--rw access* [context security-model security-level]
            |     +--rw context           snmp:context-name
            |     +--rw context-match?    enumeration
            |     +--rw security-model    snmp:security-model-or-any
            |     +--rw security-level    snmp:security-level
            |     +--rw read-view?        view-name
            |     +--rw write-view?       view-name
            |     +--rw notify-view?      view-name
            +--rw view* [name]
               +--rw name       view-name
               +--rw include*   snmp:wildcard-object-identifier
               +--rw exclude*   snmp:wildcard-object-identifier

   The "vacmSecurityToGroupTable" and "vacmAccessTable" are mapped to a
   structure of nested lists in the YANG model.  Groups are defined in
   the list "/snmp/vacm/group", and for each group, there is a sublist
   "member" that maps to "vacmSecurityToGroupTable" and a sublist
   "access" that maps to "vacmAccessTable".

   MIB views are defined in the list "/snmp/vacm/view", and for each MIB
   view, there is a leaf-list of included subtree families and a leaf-
   list of excluded subtree families.  This is more compact and thus a
   more readable representation of the "vacmViewTreeFamilyTable".

2.10.  User-Based Security Model Configuration

   The submodule "ietf-snmp-usm", which defines configuration parameters
   that correspond to the objects in SNMP-USER-BASED-SM-MIB, has the
   following structure:

      +--rw snmp
         +--rw usm
            +--rw local
            |  +--rw user* [name]
            |     +-- {common user params}
            +--rw remote* [engine-id]
               +--rw engine-id    snmp:engine-id
               +--rw user* [name]
                  +-- {common user params}

   The "{common user params}" are:

      +--rw name    snmp:identifier
      +--rw auth!
      |  +--rw (protocol)
      |     +--:(md5)
      |     |  +--rw md5
      |     |     +-- rw key    yang:hex-string
      |     +--:(sha)
      |        +--rw sha
      |           +-- rw key    yang:hex-string
      +--rw priv!
         +--rw (protocol)
            +--:(des)
            |  +--rw des
            |     +-- rw key    yang:hex-string
            +--:(aes)
               +--rw aes
                  +-- rw key    yang:hex-string

   This submodule also augments the "/snmp/target-params/params" choice
   with nodes for the SNMP User-based Security Model.

      +--rw snmp
         +--rw target-params* [name]
            ...
            +--rw (params)?
               +--:(usm)
                  +--rw usm
                     +--rw user-name         snmp:security-name
                     +--rw security-level    security-level

   In the MIB, there is a single table with local and remote users,
   indexed by the engine ID and user name.  In the YANG model, there is
   one list of local users and a nested list of remote users.

   In the MIB, there are several objects related to changing the
   authentication and privacy keys.  These objects are not present in
   the YANG model.  However, the localized key can be changed.  This
   implies that if the engine ID is changed, all users keys need to be
   changed as well.

2.11.  Transport Security Model Configuration

   The submodule "ietf-snmp-tsm", which defines configuration parameters
   that correspond to the objects in SNMP-TSM-MIB, has the following
   structure:

      +--rw snmp
         +--rw tsm
            +--rw use-prefix?   boolean

   This submodule also augments the "/snmp/target-params/params" choice
   with nodes for the SNMP Transport Security Model.

      +--rw snmp
         +--rw target-params* [name]
            ...
            +--rw (params)?
               +--:(tsm)
                  +--rw tsm
                     +--rw security-name     snmp:security-name
                     +--rw security-level    security-level

   This submodule defines the feature "tsm".  A server implements this
   feature if it supports the Transport Security Model (TSM) [RFC5591].

2.12.  Transport Layer Security Transport Model Configuration

   The submodule "ietf-snmp-tls", which defines configuration parameters
   that correspond to the objects in SNMP-TLS-TM-MIB, has the following
   structure:

      +--rw snmp
         ...
         +--rw target* [name]
         |  ...
         |  +--rw (transport)
         |     ...
         |     +--:(tls)
         |     |  +--rw tls
         |     |     +-- {common (d)tls transport params}
         |     +--:(dtls)
         |        +--rw dtls
         |           +-- {common (d)tls transport params}
         +--rw tlstm
            +--rw cert-to-name* [id]
               +--rw id             uint32
               +--rw fingerprint    x509c2n:tls-fingerprint
               +--rw map-type       identityref
               +--rw name           string

   The "{common (d)tls transport params}" are:

      +--rw ip?                   inet:host
      +--rw port?                 inet:port-number
      +--rw client-fingerprint?   x509c2n:tls-fingerprint
      +--rw server-fingerprint?   x509c2n:tls-fingerprint
      +--rw server-identity?      snmp:admin-string

   This submodule also augments the "/snmp/engine/listen/transport"
   choice with objects for the D(TLS) transport endpoints:

      +--rw snmp
         +--rw engine
            ...
            +--rw listen* [name]
               ...
               +--rw (transport)
                  ...
                  +--:(tls)
                  |  +--rw tls
                  |     +--rw ip      inet:ip-address
                  |     +--rw port?   inet:port-number
                  +--:(dtls)
                     +--rw dtls
                        +--rw ip      inet:ip-address
                        +--rw port?   inet:port-number

   This submodule defines the feature "tlstm".  A server implements this
   feature if it supports the Transport Layer Security (TLS) Transport
   Model (TLSTM) [RFC6353].

2.13.  Secure Shell Transport Model Configuration

   The submodule "ietf-snmp-ssh", which defines configuration parameters
   that correspond to the objects in SNMP-SSH-TM-MIB, has the following
   structure:

      +--rw snmp
         ...
         +--rw target* [name]
           ...
           +--rw (transport)
              ...
              +--:(ssh)
                 +--rw ssh
                    +--rw ip          inet:host
                    +--rw port?       inet:port-number
                    +--rw username?   string

   It also augments the "/snmp/engine/listen/transport" choice with
   objects for the SSH transport endpoints:

      +--rw snmp
         +--rw engine
            ...
            +--rw listen* [name]
               ...
               +--rw (transport)
                  ...
                  +--:(ssh)
                     +--rw ssh
                        +--rw ip          inet:host
                        +--rw port?       inet:port-number
                        +--rw username?   string

   This submodule defines the feature "sshtm".  A server implements this
   feature if it supports the Secure Shell Transport Model (SSHTM)
   [RFC5592].

3.  Implementation Guidelines

   This section describes some challenges for implementations that
   support both the YANG models defined in this document and either
   read-write or read-only SNMP access to the same data, using the
   standard MIB modules.

   As described in Section 2.2, the persistency models in NETCONF and
   SNMP are quite different.  This poses a challenge for an
   implementation to support both NETCONF and SNMP access to the same
   data, in particular if the data is writable over both protocols.
   Specifically, the configuration data may exist in some combination of
   the three NETCONF configuration datastores, and this data must be
   mapped to rows in the SNMP tables, in some SNMP contexts, with proper
   values for the StorageType columns.

   This problem is not new; it has been handled in many implementations
   that support configuration of the SNMP engine over a command line
   interface (CLI), which normally have a persistency model similar to
   NETCONF.

   Since there is not one solution that works for all cases, this
   document does not provide a recommended solution.  Instead, some of
   the challenges involved are described below.

3.1.  Supporting read-only SNMP Access

   If a device implements only :writable-running, it is trivial to map
   the contents of "running" to data in the SNMP tables, where all
   instances of the StorageType columns have the value "nonVolatile".

   If a device implements :candidate but not :startup, the
   implementation may choose to not expose the contents of the
   "candidate" datastore over SNMP and map the contents of "running" as
   described above.  As an option, the contents of "candidate" might be
   accessible in a separate SNMP context.

   If a device implements :startup, the handling of StorageType becomes
   more difficult.  Since the contents of "running" and "startup" might
   differ, data in "running" cannot automatically be mapped to instances
   with StorageType "nonVolatile".  If a particular entry exists in
   "running" but not in "startup", its StorageType should be "volatile".
   If a particular entry exists in "startup" but not "running", it
   should not be mapped to an SNMP instance, at least not in the default
   SNMP context.

3.2.  Supporting read-write SNMP Access

   If the implementation supports read-write access to data over SNMP,
   and specifically creation of table rows, special attention has to be
   given to the handling of the RowStatus and StorageType columns.  The
   problem is to determine which table rows to store in the
   configuration datastores and which configuration datastore is
   appropriate for each row.

   The SNMP tables contain a mix of configured data and operational
   state, and only rows with an "active" RowStatus column should be
   stored in a configuration datastore.

   If a device implements only :writable-running, "active" rows with a
   "nonVolatile" StorageType column can be stored in "running".  Rows
   with a "volatile" StorageType column are operational state.

   If a device implements :candidate but not :writable-running, all
   configuration changes typically go through the "candidate", even if
   they are done over SNMP.  An implementation might have to perform
   some automatic commit of the "candidate" when data is written over
   SNMP, since there is no explicit "commit" operation in SNMP.

   If a device implements :startup, "nonVolatile" rows cannot just be
   written to "running"; they must also be copied into "startup".
   "volatile" rows may be treated as operational state and not copied to
   any datastore, or they may be copied into "running".

   Cooperating SNMP management applications may use spin lock objects
   (snmpTargetSpinLock [RFC3413], usmUserSpinLock [RFC3414],
   vacmViewSpinLock [RFC3415]) to coordinate concurrent write requests.
   Implementations supporting modifications of MIB objects protected by
   a spin lock via NETCONF should ensure that the spin lock objects are
   properly incremented whenever objects are changed via NETCONF.  This
   allows cooperating SNMP management applications to discover that
   concurrent modifications are taking place.

4.  Definitions

4.1.  Module 'ietf-x509-cert-to-name'

   This YANG module imports typedefs from [RFC6991].

   <CODE BEGINS> file "ietf-x509-cert-to-name.yang"

   module ietf-x509-cert-to-name {

     namespace "urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name";
     prefix x509c2n;

     import ietf-yang-types {
       prefix yang;
     }

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This module contains a collection of YANG definitions for
        extracting a name from an X.509 certificate.

        The algorithm used to extract a name from an X.509 certificate
        was first defined in RFC 6353.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     reference
       "RFC 6353: Transport Layer Security (TLS) Transport Model for
          the Simple Network Management Protocol (SNMP)";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";

     }

     typedef tls-fingerprint {
       type yang:hex-string {
         pattern '([0-9a-fA-F]){2}(:([0-9a-fA-F]){2}){0,254}';
       }
       description
        "A fingerprint value that can be used to uniquely reference
         other data of potentially arbitrary length.

         A tls-fingerprint value is composed of a 1-octet hashing
         algorithm identifier followed by the fingerprint value.  The
         first octet value identifying the hashing algorithm is taken
         from the IANA 'TLS HashAlgorithm Registry' (RFC 5246).  The
         remaining octets are filled using the results of the hashing
         algorithm.";
       reference
        "RFC 6353: Transport Layer Security (TLS) Transport Model
           for the Simple Network Management Protocol (SNMP).
           SNMP-TLS-TM-MIB.SnmpTLSFingerprint";
     }

     /* Identities */

     identity cert-to-name {
       description
         "Base identity for algorithms to derive a name from a
          certificate.";
     }

     identity specified {
       base cert-to-name;
       description
         "Directly specifies the name to be used for the certificate.
          The value of the leaf 'name' in the cert-to-name list is
          used.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertSpecified";
     }

     identity san-rfc822-name {
       base cert-to-name;
       description
         "Maps a subjectAltName's rfc822Name to a name.  The local part
          of the rfc822Name is passed unaltered, but the host-part of
          the name must be passed in lowercase.  For example, the
          rfc822Name field FooBar@Example.COM is mapped to name
          FooBar@example.com.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertSANRFC822Name";
     }

     identity san-dns-name {
       base cert-to-name;
       description
         "Maps a subjectAltName's dNSName to a name after first
          converting it to all lowercase (RFC 5280 does not specify
          converting to lowercase, so this involves an extra step).
          This mapping results in a 1:1 correspondence between
          subjectAltName dNSName values and the name values.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertSANDNSName";
     }

     identity san-ip-address {
       base cert-to-name;
       description
         "Maps a subjectAltName's iPAddress to a name by
          transforming the binary-encoded address as follows:

            1) for IPv4, the value is converted into a
               decimal-dotted quad address (e.g., '192.0.2.1').

            2) for IPv6 addresses, the value is converted into a
               32-character, all-lowercase hexadecimal string
               without any colon separators.

          This mapping results in a 1:1 correspondence between
          subjectAltName iPAddress values and the name values.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertSANIpAddress";
     }

     identity san-any {
       base cert-to-name;
       description
         "Maps any of the following fields using the corresponding
          mapping algorithms:

            +------------+-----------------+
            | Type       | Algorithm       |
            |------------+-----------------|
            | rfc822Name | san-rfc822-name |
            | dNSName    | san-dns-name    |
            | iPAddress  | san-ip-address  |
            +------------+-----------------+

          The first matching subjectAltName value found in the
          certificate of the above types MUST be used when deriving
          the name.  The mapping algorithm specified in the
          'Algorithm' column MUST be used to derive the name.

          This mapping results in a 1:1 correspondence between
          subjectAltName values and name values.  The three sub-mapping
          algorithms produced by this combined algorithm cannot produce
          conflicting results between themselves.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertSANAny";

     }

     identity common-name {
       base cert-to-name;
       description
         "Maps a certificate's CommonName to a name after converting
          it to a UTF-8 encoding.  The usage of CommonNames is
          deprecated, and users are encouraged to use subjectAltName
          mapping methods instead.  This mapping results in a 1:1
          correspondence between certificate CommonName values and name
          values.";
       reference
         "RFC 6353: Transport Layer Security (TLS) Transport Model
            for the Simple Network Management Protocol (SNMP).
            SNMP-TLS-TM-MIB.snmpTlstmCertCommonName";
     }

     /*
      * Groupings
      */

     grouping cert-to-name {
       description
         "Defines nodes for mapping certificates to names.  Modules
          that use this grouping should describe how the resulting
          name is used.";

       list cert-to-name {
         key id;
         description
           "This list defines how certificates are mapped to names.
            The name is derived by considering each cert-to-name
            list entry in order.  The cert-to-name entry's fingerprint
            determines whether the list entry is a match:

            1) If the cert-to-name list entry's fingerprint value
               matches that of the presented certificate, then consider
               the list entry a successful match.

            2) If the cert-to-name list entry's fingerprint value
               matches that of a locally held copy of a trusted CA
               certificate, and that CA certificate was part of the CA
               certificate chain to the presented certificate, then
               consider the list entry a successful match.

           Once a matching cert-to-name list entry has been found, the
           map-type is used to determine how the name associated with
           the certificate should be determined.  See the map-type

           leaf's description for details on determining the name value.
           If it is impossible to determine a name from the cert-to-name
           list entry's data combined with the data presented in the
           certificate, then additional cert-to-name list entries MUST
           be searched to look for another potential match.

           Security administrators are encouraged to make use of
           certificates with subjectAltName fields that can be mapped to
           names so that a single root CA certificate can allow all
           child certificates' subjectAltName fields to map directly to
           a name via a 1:1 transformation.";
         reference
          "RFC 6353: Transport Layer Security (TLS) Transport Model
             for the Simple Network Management Protocol (SNMP).
             SNMP-TLS-TM-MIB.snmpTlstmCertToTSNEntry";

         leaf id {
           type uint32;
           description
             "The id specifies the order in which the entries in the
              cert-to-name list are searched.  Entries with lower
              numbers are searched first.";
           reference
             "RFC 6353: Transport Layer Security (TLS) Transport Model
                for the Simple Network Management Protocol
                (SNMP).
                SNMP-TLS-TM-MIB.snmpTlstmCertToTSNID";
         }

         leaf fingerprint {
           type x509c2n:tls-fingerprint;
           mandatory true;
           description
             "Specifies a value with which the fingerprint of the
              full certificate presented by the peer is compared.  If
              the fingerprint of the full certificate presented by the
              peer does not match the fingerprint configured, then the
              entry is skipped, and the search for a match continues.";
           reference
             "RFC 6353: Transport Layer Security (TLS) Transport Model
                for the Simple Network Management Protocol
                (SNMP).
                SNMP-TLS-TM-MIB.snmpTlstmCertToTSNFingerprint";
         }

         leaf map-type {
           type identityref {
             base cert-to-name;

           }
           mandatory true;
           description
             "Specifies the algorithm used to map the certificate
              presented by the peer to a name.

              Mappings that need additional configuration objects should
              use the 'when' statement to make them conditional based on
              the map-type.";
           reference
             "RFC 6353: Transport Layer Security (TLS) Transport Model
                for the Simple Network Management Protocol
                (SNMP).
                SNMP-TLS-TM-MIB.snmpTlstmCertToTSNMapType";
         }

         leaf name {
           when "../map-type = 'x509c2n:specified'";
           type string;
           mandatory true;
           description
             "Directly specifies the NETCONF username when the
              map-type is 'specified'.";
           reference
             "RFC 6353: Transport Layer Security (TLS) Transport Model
                for the Simple Network Management Protocol
                (SNMP).
                SNMP-TLS-TM-MIB.snmpTlstmCertToTSNData";
         }
       }
     }
   }

   <CODE ENDS>

4.2.  Module 'ietf-snmp'

   <CODE BEGINS> file "ietf-snmp.yang"

   module ietf-snmp {

     namespace "urn:ietf:params:xml:ns:yang:ietf-snmp";
     prefix snmp;

     include ietf-snmp-common {
       revision-date 2014-12-10;
     }
     include ietf-snmp-engine {

       revision-date 2014-12-10;
     }
     include ietf-snmp-target {
       revision-date 2014-12-10;
     }
     include ietf-snmp-notification {
       revision-date 2014-12-10;
     }
     include ietf-snmp-proxy {
       revision-date 2014-12-10;
     }
     include ietf-snmp-community {
       revision-date 2014-12-10;
     }
     include ietf-snmp-usm {
       revision-date 2014-12-10;
     }
     include ietf-snmp-tsm {
       revision-date 2014-12-10;
     }
     include ietf-snmp-vacm {
       revision-date 2014-12-10;
     }
     include ietf-snmp-tls {
       revision-date 2014-12-10;
     }
     include ietf-snmp-ssh {
       revision-date 2014-12-10;
     }

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This module contains a collection of YANG definitions for
        configuring SNMP engines.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

   }

   <CODE ENDS>

4.3.  Submodule 'ietf-snmp-common'

   <CODE BEGINS> file "ietf-snmp-common.yang"

   submodule ietf-snmp-common {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     import ietf-yang-types {
       prefix yang;
     }

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of common YANG definitions
        for configuring SNMP engines.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     /* Collection of SNMP-specific data types */

     typedef admin-string {
       type string {
         length "0..255";
       }
       description
         "Represents SnmpAdminString as defined in RFC 3411.

         Note that the size of an SnmpAdminString is measured in
         octets, not characters.";

       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks.
            SNMP-FRAMEWORK-MIB.SnmpAdminString";
     }

     typedef identifier {
       type admin-string {
         length "1..32";
       }
       description
         "Identifiers are used to name items in the SNMP configuration
         datastore.";
     }

     typedef context-name {
       type admin-string {
         length "0..32";
       }
       description
         "The context type represents an SNMP context name.";
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef security-name {
       type admin-string {
         length "1..32";
       }
       description
         "The security-name type represents an SNMP security name.";
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef security-model {
       type union {
         type enumeration {
           enum v1  { value 1; }
           enum v2c { value 2; }
           enum usm { value 3; }
           enum tsm { value 4; }
         }
         type int32 {
           range "1..2147483647";
         }

       }
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef security-model-or-any {
       type union {
         type enumeration {
           enum any { value 0; }
         }
         type security-model;
       }
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef security-level {
       type enumeration {
         enum no-auth-no-priv { value 1; }
         enum auth-no-priv    { value 2; }
         enum auth-priv       { value 3; }
       }
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef engine-id {
       type yang:hex-string {
         pattern '([0-9a-fA-F]){2}(:([0-9a-fA-F]){2}){4,31}';
       }
       description
         "The engine ID specified as a list of colon-specified
         hexadecimal octets, e.g., '80:00:02:b8:04:61:62:63'.";
       reference
         "RFC 3411: An Architecture for Describing Simple Network
            Management Protocol (SNMP) Management Frameworks";
     }

     typedef wildcard-object-identifier {
       type string;
       description
         "The wildcard-object-identifier type represents an SNMP object
         identifier where subidentifiers can be given either as a label,
         in numeric form, or a wildcard, represented by an asterisk
         ('*').";

     }

     typedef tag-value {
       type string {
         length "0..255";
       }
       description
         "Represents SnmpTagValue as defined in RFC 3413.

         Note that the size of an SnmpTagValue is measured in
         octets, not characters.";
       reference
         "RFC 3413: Simple Network Management Protocol (SNMP)
            Applications.
            SNMP-TARGET-MIB.SnmpTagValue";
     }

     container snmp {
       description
         "Top-level container for SNMP-related configuration and
         status objects.";
     }

   }

   <CODE ENDS>

4.4.  Submodule 'ietf-snmp-engine'

   <CODE BEGINS> file "ietf-snmp-engine.yang"

   submodule ietf-snmp-engine {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     import ietf-inet-types {
       prefix inet;
     }

     include ietf-snmp-common;

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>

        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of YANG definitions
        for configuring SNMP engines.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).
        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     augment /snmp:snmp {

       container engine {

         description
           "Configuration of the SNMP engine.";

         leaf enabled {
           type boolean;
           default "false";
           description

             "Enables the SNMP engine.";
         }

         list listen {
           key "name";
           description
             "Configuration of the transport endpoints on which the
              engine listens.";

           leaf name {
             type snmp:identifier;
             description
               "An arbitrary name for the list entry.";
           }

           choice transport {
             mandatory true;
             description
               "The transport-protocol-specific parameters for this
                endpoint.  Submodules providing configuration for
                additional transports are expected to augment this
                choice.";
             case udp {
               container udp {
                 leaf ip {
                   type inet:ip-address;
                   mandatory true;
                   description
                     "The IPv4 or IPv6 address on which the engine
                      listens.";
                 }
                 leaf port {
                   type inet:port-number;
                   description
                     "The UDP port on which the engine listens.

                      If the port is not configured, an engine that
                      acts as a Command Responder uses port 161, and
                      an engine that acts as a Notification Receiver
                      uses port 162.";
                 }
               }
             }
           }
         }

         container version {
           description
             "SNMP version used by the engine.";
           leaf v1 {
             type empty;
           }
           leaf v2c {
             type empty;
           }
           leaf v3 {
             type empty;
           }
         }

         leaf engine-id {
           type snmp:engine-id;
           description
             "The local SNMP engine's administratively assigned unique
              identifier.

              If this leaf is not set, the device automatically
              calculates an engine ID, as described in RFC 3411.  A
              server MAY initialize this leaf with the automatically
              created value.";
           reference
             "RFC 3411: An Architecture for Describing Simple Network
                Management Protocol (SNMP) Management
                Frameworks.
                SNMP-FRAMEWORK-MIB.snmpEngineID";
         }

         leaf enable-authen-traps {
           type boolean;
           description
             "Indicates whether the SNMP entity is permitted to
              generate authenticationFailure traps.";
           reference
             "RFC 3418: Management Information Base (MIB) for the
                Simple Network Management Protocol (SNMP)
                SNMPv2-MIB.snmpEnableAuthenTraps";
         }
       }
     }
   }

   <CODE ENDS>

4.5.  Submodule 'ietf-snmp-target'

   <CODE BEGINS> file "ietf-snmp-target.yang"

   submodule ietf-snmp-target {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     import ietf-inet-types {
       prefix inet;
     }

     include ietf-snmp-common;

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of YANG definitions
        for configuring SNMP targets.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     reference
       "RFC 3413: Simple Network Management Protocol (SNMP)
          Applications";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     augment /snmp:snmp {

       list target {
         key name;
         description
           "List of targets.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP)
              Applications.
              SNMP-TARGET-MIB.snmpTargetAddrTable";

         leaf name {
           type snmp:identifier;
           description
             "Identifies the target.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP)
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrName";
         }
         choice transport {
           mandatory true;
           description
             "Transport address of the target.

              The snmpTargetAddrTDomain and snmpTargetAddrTAddress
              objects are mapped to transport-specific YANG nodes.  Each
              transport is configured as a separate case in this
              choice.  Submodules providing configuration for additional
              transports are expected to augment this choice.";

           reference
             "RFC 3413: Simple Network Management Protocol (SNMP)
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrTDomain
                SNMP-TARGET-MIB.snmpTargetAddrTAddress";
           case udp {
             reference
              "RFC 3417: Transport Mappings for the Simple Network
                 Management Protocol (SNMP).
                 SNMPv2-TM.snmpUDPDomain
               RFC 3419: Textual Conventions for Transport Addresses.
                 TRANSPORT-ADDRESS-MIB.transportDomainUdpIpv4
                 TRANSPORT-ADDRESS-MIB.transportDomainUdpIpv4z
                 TRANSPORT-ADDRESS-MIB.transportDomainUdpIpv6
                 TRANSPORT-ADDRESS-MIB.transportDomainUdpIpv6z";
             container udp {
               leaf ip {
                 type inet:ip-address;
                 mandatory true;
                 reference
                   "RFC 3413: Simple Network Management Protocol (SNMP).
                      SNMP-TARGET-MIB.snmpTargetAddrTAddress";
               }
               leaf port {
                 type inet:port-number;
                 default 162;
                 description
                   "UDP port number.";
                 reference
                   "RFC 3413: Simple Network Management Protocol (SNMP).
                      SNMP-TARGET-MIB.snmpTargetAddrTAddress";
               }
               leaf prefix-length {
                 type uint8;
                 description
                   "The value of this leaf must match the value of
                    ../snmp:ip.  If ../snmp:ip contains an IPv4 address,
                    this leaf must be less than or equal to 32.  If it
                    contains an IPv6 address, it must be less than or
                    equal to 128.

                    Note that the prefix-length is currently only used
                    by the Community-based Security Model to filter
                    incoming messages.  Furthermore, the prefix-length
                    filtering does not cover all possible filters
                    supported by the corresponding MIB object.";

                 reference
                   "RFC 3584: Coexistence between Version 1, Version 2,
                      and Version 3 of the Internet-standard
                      Network Management Framework.
                      SNMP-COMMUNITY-MIB.snmpTargetAddrTMask";
               }
             }
           }
         }
         leaf-list tag {
           type snmp:tag-value;
           description
             "List of tag values used to select target addresses.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrTagList";
         }
         leaf timeout {
           type uint32;
           units "0.01 seconds";
           default 1500;
           description
             "Needed only if this target can receive
              InformRequest-PDUs.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrTimeout";
         }
         leaf retries {
           type uint8;
           default 3;
           description
             "Needed only if this target can receive
              InformRequest-PDUs.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrRetryCount";
         }
         leaf target-params {
           type snmp:identifier;
           mandatory true;
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetAddrParams";

         }
       }

       list target-params {
         key name;
         description
           "List of target parameters.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP).
              Applications.
              SNMP-TARGET-MIB.snmpTargetParamsTable";

         leaf name {
           type snmp:identifier;
         }
         choice params {
           description
             "This choice is augmented with case nodes containing
              configuration parameters specific to the security model.";
         }
       }
     }
   }

   <CODE ENDS>

4.6.  Submodule 'ietf-snmp-notification'

   <CODE BEGINS> file "ietf-snmp-notification.yang"

   submodule ietf-snmp-notification {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     include ietf-snmp-common;
     include ietf-snmp-target;

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of YANG definitions
        for configuring SNMP notifications.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     reference
       "RFC 3413: Simple Network Management Protocol (SNMP)
          Applications";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     feature notification-filter {
       description
         "A server implements this feature if it supports SNMP
         notification filtering.";
       reference
         "RFC 3413: Simple Network Management Protocol (SNMP)
            Applications";
     }

     augment /snmp:snmp {

       list notify {
         key name;
         description
           "Targets that will receive notifications.

            Entries in this list are mapped 1-1 to entries in
            snmpNotifyTable, except that if an entry in snmpNotifyTable
            has an snmpNotifyTag for which no snmpTargetAddrEntry
            exists, then the snmpNotifyTable entry is not mapped to an
            entry in this list.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP).
              Applications.
              SNMP-NOTIFICATION-MIB.snmpNotifyTable";

         leaf name {
           type snmp:identifier;
           description
             "An arbitrary name for the list entry.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyName";
         }
         leaf tag {
           type snmp:tag-value;
           mandatory true;
           description
             "Target tag, selects a set of notification targets.

              Implementations MAY restrict the values of this leaf
              to be one of the available values of /snmp/target/tag in
              a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyTag";
         }
         leaf type {
           type enumeration {
             enum trap { value 1; }
             enum inform { value 2; }
           }
           default trap;
           description
             "Defines the notification type to be generated.";

           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyType";
         }
       }

       list notify-filter-profile {
         if-feature snmp:notification-filter;
         key name;

         description
           "Notification filter profiles.

            The leaf /snmp/target/notify-filter-profile is used
            to associate a filter profile with a target.

            If an entry in this list is referred to by one or more
            /snmp/target/notify-filter-profile items, each such
            notify-filter-profile is represented by one
            snmpNotifyFilterProfileEntry.

            If an entry in this list is not referred to by any
            /snmp/target/notify-filter-profile, the entry is not mapped
            to snmpNotifyFilterProfileTable.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP).
              Applications.
              SNMP-NOTIFICATION-MIB.snmpNotifyFilterProfileTable
              SNMP-NOTIFICATION-MIB.snmpNotifyFilterTable";

         leaf name {
           type snmp:identifier;
           description
             "Name of the filter profile.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterProfileName";
         }

         leaf-list include {
           type snmp:wildcard-object-identifier;
           description
             "A family of subtrees included in this filter.";

           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterSubtree
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterMask
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterType";
         }

         leaf-list exclude {
           type snmp:wildcard-object-identifier;
           description
             "A family of subtrees excluded from this filter.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterSubtree
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterMask
                SNMP-NOTIFICATION-MIB.snmpNotifyFilterType";
         }
       }

     }

     augment /snmp:snmp/snmp:target-params {
       reference
         "RFC 3413: Simple Network Management Protocol (SNMP).
            Applications.
            SNMP-NOTIFICATION-MIB.snmpNotifyFilterProfileTable";
       leaf notify-filter-profile {
         if-feature snmp:notification-filter;
         type leafref {
           path "/snmp/notify-filter-profile/name";
         }
         description
           "This leafref leaf is used to represent the sparse
            relationship between the /snmp/target-params list and the
            /snmp/notify-filter-profile list.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP).
              Applications.
              SNMP-NOTIFICATION-MIB.snmpNotifyFilterProfileName";
       }
     }

   }

   <CODE ENDS>

4.7.  Submodule 'ietf-snmp-proxy'

   <CODE BEGINS> file "ietf-snmp-proxy.yang"

   submodule ietf-snmp-proxy {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     include ietf-snmp-common;
     include ietf-snmp-target;

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of YANG definitions
        for configuring SNMP proxies.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     reference
       "RFC 3413: Simple Network Management Protocol (SNMP)
          Applications";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     feature proxy {
       description
         "A server implements this feature if it can act as an
         SNMP proxy.";
       reference
         "RFC 3413: Simple Network Management Protocol (SNMP)
            Applications";
     }

     augment /snmp:snmp {
       if-feature snmp:proxy;

       list proxy {
         key name;

         description
           "List of proxy parameters.";
         reference
           "RFC 3413: Simple Network Management Protocol (SNMP).
              Applications.
              SNMP-PROXY-MIB.snmpProxyTable";

         leaf name {
           type snmp:identifier;
           description
             "Identifies the proxy parameter entry.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyName";
         }
         leaf type {
           type enumeration {
             enum read { value 1; }
             enum write { value 2; }
             enum trap { value 3; }
             enum inform { value 4; }

           }
           mandatory true;
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyType";
         }
         leaf context-engine-id {
           type snmp:engine-id;
           mandatory true;
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyContextEngineID";
         }
         leaf context-name {
           type snmp:context-name;
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyContextName";
         }
         leaf target-params-in {
           type snmp:identifier;
           description
             "The name of a target parameters list entry.

              Implementations MAY restrict the values of this
              leaf to be one of the available values of
              /snmp/target-params/name in a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyTargetParamsIn";
         }
         leaf single-target-out {
           when "../type = 'read' or ../type = 'write'";
           type snmp:identifier;
           description
             "Implementations MAY restrict the values of this leaf
              to be one of the available values of /snmp/target/name in
              a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxySingleTargetOut";
         }

         leaf multiple-target-out {
           when "../type = 'trap' or ../type = 'inform'";
           type snmp:tag-value;
           description
             "Implementations MAY restrict the values of this leaf
              to be one of the available values of /snmp/target/tag in
              a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-PROXY-MIB.snmpProxyMultipleTargetOut";
         }
       }
     }
   }

   <CODE ENDS>

4.8.  Submodule 'ietf-snmp-community'

   <CODE BEGINS> file "ietf-snmp-community.yang"

   submodule ietf-snmp-community {

     belongs-to ietf-snmp {
       prefix snmp;
     }

     import ietf-netconf-acm {
       prefix nacm;
     }

     include ietf-snmp-common;
     include ietf-snmp-target;
     include ietf-snmp-proxy;

     organization
       "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

     contact
       "WG Web:   <http://tools.ietf.org/wg/netmod/>
        WG List:  <mailto:netmod@ietf.org>

        WG Chair: Thomas Nadeau
                  <mailto:tnadeau@lucidvision.com>

        WG Chair: Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>

        Editor:   Martin Bjorklund
                  <mailto:mbj@tail-f.com>

        Editor:   Juergen Schoenwaelder
                  <mailto:j.schoenwaelder@jacobs-university.de>";

     description
       "This submodule contains a collection of YANG definitions
        for configuring community-based SNMP.

        Copyright (c) 2014 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 7407; see
        the RFC itself for full legal notices.";

     reference
       "RFC 3584: Coexistence between Version 1, Version 2, and
          Version 3 of the Internet-standard Network
          Management Framework";

     revision 2014-12-10 {
       description
         "Initial revision.";
       reference
         "RFC 7407: A YANG Data Model for SNMP Configuration";
     }

     augment /snmp:snmp {

       list community {
         key index;

         description
           "List of communities.";
         reference
           "RFC 3584: Coexistence between Version 1, Version 2,
              and Version 3 of the Internet-standard
              Network Management Framework.
              SNMP-COMMUNITY-MIB.snmpCommunityTable";

         leaf index {
           type snmp:identifier;
           description
             "Index into the community list.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunityIndex";
         }
         choice name {
           nacm:default-deny-all;
           description
             "The community name, specified as either a string or
              a binary value.  The binary name is used when the
              community name contains characters that are not legal
              in a string.

              If not set, the value of 'security-name' is operationally
              used as the snmpCommunityName.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunityName";
           leaf text-name {
             type string;
             description
               "A community name that can be represented as a
                YANG string.";
           }
           leaf binary-name {
             type binary;
             description
               "A community name represented as a binary value.";
           }
         }
         leaf security-name {
           type snmp:security-name;
           mandatory true;
           nacm:default-deny-all;
           description
             "The snmpCommunitySecurityName of this entry.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunitySecurityName";

         }
         leaf engine-id {
           if-feature snmp:proxy;
           type snmp:engine-id;
           description
             "If not set, the value of the local SNMP engine is
              operationally used by the device.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunityContextEngineID";
         }
         leaf context {
           type snmp:context-name;
           default "";
           description
             "The context in which management information is accessed
              when using the community string specified by this entry.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunityContextName";
         }
         leaf target-tag {
           type snmp:tag-value;
           description
             "Used to limit access for this community to the specified
              targets.

              Implementations MAY restrict the values of this leaf
              to be one of the available values of /snmp/target/tag in
              a valid configuration.";
           reference
             "RFC 3584: Coexistence between Version 1, Version 2,
                and Version 3 of the Internet-standard
                Network Management Framework.
                SNMP-COMMUNITY-MIB.snmpCommunityTransportTag";
         }
       }
     }

     grouping v1-target-params {
       container v1 {
         description
           "SNMPv1 parameters type.
            Represents snmpTargetParamsMPModel '0',
            snmpTargetParamsSecurityModel '1', and
            snmpTargetParamsSecurityLevel 'noAuthNoPriv'.";
         leaf security-name {
           type snmp:security-name;
           mandatory true;
           description
             "Implementations MAY restrict the values of this leaf
              to be one of the available values of
              /snmp/community/security-name in a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetParamsSecurityName";
         }
       }
     }

     grouping v2c-target-params {
       container v2c {
         description
           "SNMPv2 community parameters type.
            Represents snmpTargetParamsMPModel '1',
            snmpTargetParamsSecurityModel '2', and
            snmpTargetParamsSecurityLevel 'noAuthNoPriv'.";
         leaf security-name {
           type snmp:security-name;
           mandatory true;
           description
             "Implementations MAY restrict the values of this leaf
              to be one of the available values of
              /snmp/community/security-name in a valid configuration.";
           reference
             "RFC 3413: Simple Network Management Protocol (SNMP).
                Applications.
                SNMP-TARGET-MIB.snmpTargetParamsSecurityName";
         }
       }
     }

     augment /snmp:snmp/snmp:target-params/snmp:params {
       case v1 {
         uses v1-target-params;
       }
       case v2c {
         uses v2c-target-params;
       }
     }

          augment /snmp:snmp/snmp:target { 
EID 4240 (Verified) is as follows:

Section: 4.8

Original Text:

     augment /snmp:snmp/snmp:target {
       when "snmp:v1 or snmp:v2c";

Corrected Text:

     augment /snmp:snmp/snmp:target {
Notes:
The nodes refered to in the "when" expression do not exist.
(They were there in an early draft version, but when they were moved, we forgot to fix the "when" expression).
leaf mms { type union { type enumeration { enum "unknown" { value 0; } } type int32 { range "484..max"; } } default "484"; description "The maximum message size."; reference "RFC 3584: Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework. SNMP-COMMUNITY-MIB.snmpTargetAddrMMS"; } } } <CODE ENDS> 4.9. Submodule 'ietf-snmp-vacm' <CODE BEGINS> file "ietf-snmp-vacm.yang" submodule ietf-snmp-vacm { belongs-to ietf-snmp { prefix snmp; } include ietf-snmp-common; organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; contact "WG Web: <http://tools.ietf.org/wg/netmod/> WG List: <mailto:netmod@ietf.org> WG Chair: Thomas Nadeau <mailto:tnadeau@lucidvision.com> WG Chair: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de> Editor: Martin Bjorklund <mailto:mbj@tail-f.com> Editor: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de>"; description "This submodule contains a collection of YANG definitions for configuring the View-based Access Control Model (VACM) of SNMP. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 7407; see the RFC itself for full legal notices."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)"; revision 2014-12-10 { description "Initial revision."; reference "RFC 7407: A YANG Data Model for SNMP Configuration"; } typedef view-name { type snmp:identifier; description "The view-name type represents an SNMP VACM view name."; } typedef group-name { type snmp:identifier; description "The group-name type represents an SNMP VACM group name."; } augment /snmp:snmp { container vacm { description "Configuration of the View-based Access Control Model."; list group { key name; description "VACM groups. This data model has a different structure than the MIB. Groups are explicitly defined in this list, and group members are defined in the 'member' list (mapped to vacmSecurityToGroupTable), and access for the group is defined in the 'access' list (mapped to vacmAccessTable)."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmSecurityToGroupTable SNMP-VIEW-BASED-ACM-MIB.vacmAccessTable"; leaf name { type group-name; description "The name of this VACM group."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmGroupName"; } list member { key "security-name"; description "A member of this VACM group. A specific combination of security-name and security-model MUST NOT be present in more than one group."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmSecurityToGroupTable"; leaf security-name { type snmp:security-name; description "The securityName of a group member."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmSecurityName"; } leaf-list security-model { type snmp:security-model; min-elements 1; description "The security models under which this security-name is a member of this group."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmSecurityModel"; } } list access { key "context security-model security-level"; description "Definition of access right for groups."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessTable"; leaf context { type snmp:context-name; description "The context (prefix) under which the access rights apply."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessContextPrefix"; } leaf context-match { type enumeration { enum exact { value 1; } enum prefix { value 2; } } default exact; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessContextMatch"; } leaf security-model { type snmp:security-model-or-any; description "The security model under which the access rights apply."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessSecurityModel"; } leaf security-level { type snmp:security-level; description "The minimum security level under which the access rights apply."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessSecurityLevel"; } leaf read-view { type view-name; description "The name of the MIB view of the SNMP context authorizing read access. If this leaf does not exist in a configuration, it maps to a zero-length vacmAccessReadViewName. Implementations MAY restrict the values of this leaf to be one of the available values of /snmp/vacm/view/name in a valid configuration."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessReadViewName"; } leaf write-view { type view-name; description "The name of the MIB view of the SNMP context authorizing write access. If this leaf does not exist in a configuration, it maps to a zero-length vacmAccessWriteViewName. Implementations MAY restrict the values of this leaf to be one of the available values of /snmp/vacm/view/name in a valid configuration."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessWriteViewName"; } leaf notify-view { type view-name; description "The name of the MIB view of the SNMP context authorizing notify access. If this leaf does not exist in a configuration, it maps to a zero-length vacmAccessNotifyViewName. Implementations MAY restrict the values of this leaf to be one of the available values of /snmp/vacm/view/name in a valid configuration."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmAccessNotifyViewName"; } } } list view { key name; description "Definition of MIB views."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyTable"; leaf name { type view-name; description "The name of this VACM MIB view."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyName"; } leaf-list include { type snmp:wildcard-object-identifier; description "A family of subtrees included in this MIB view."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilySubtree SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyMask SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyType"; } leaf-list exclude { type snmp:wildcard-object-identifier; description "A family of subtrees excluded from this MIB view."; reference "RFC 3415: View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilySubtree SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyMask SNMP-VIEW-BASED-ACM-MIB.vacmViewTreeFamilyType"; } } } } } <CODE ENDS> 4.10. Submodule 'ietf-snmp-usm' This YANG submodule imports YANG extensions from [RFC6536]. <CODE BEGINS> file "ietf-snmp-usm.yang" submodule ietf-snmp-usm { belongs-to ietf-snmp { prefix snmp; } import ietf-yang-types { prefix yang; } import ietf-netconf-acm { prefix nacm; } include ietf-snmp-common; include ietf-snmp-target; include ietf-snmp-proxy; organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; contact "WG Web: <http://tools.ietf.org/wg/netmod/> WG List: <mailto:netmod@ietf.org> WG Chair: Thomas Nadeau <mailto:tnadeau@lucidvision.com> WG Chair: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de> Editor: Martin Bjorklund <mailto:mbj@tail-f.com> Editor: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de>"; description "This submodule contains a collection of YANG definitions for configuring the User-based Security Model (USM) of SNMP. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 7407; see the RFC itself for full legal notices."; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)"; revision 2014-12-10 { description "Initial revision."; reference "RFC 7407: A YANG Data Model for SNMP Configuration"; } grouping key { leaf key { type yang:hex-string; mandatory true; nacm:default-deny-all; description "Localized key specified as a list of colon-specified hexadecimal octets."; } } grouping user-list { list user { key "name"; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmUserTable"; leaf name { type snmp:identifier; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmUserName"; } container auth { presence "enables authentication"; description "Enables authentication of the user."; choice protocol { mandatory true; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmUserAuthProtocol"; container md5 { uses key; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmHMACMD5AuthProtocol"; } container sha { uses key; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmHMACSHAAuthProtocol"; } } } container priv { must "../auth" { error-message "when privacy (confidentiality) is used, " + "authentication must also be used"; } presence "enables encryption"; description "Enables encryption of SNMP messages."; choice protocol { mandatory true; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmUserPrivProtocol"; container des { uses key; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmDESPrivProtocol"; } container aes { uses key; reference "RFC 3826: The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model. SNMP-USM-AES-MIB.usmAesCfb128Protocol"; } } } } } augment /snmp:snmp { container usm { description "Configuration of the User-based Security Model."; container local { uses user-list; } list remote { key "engine-id"; leaf engine-id { type snmp:engine-id; reference "RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). SNMP-USER-BASED-SM-MIB.usmUserEngineID"; } uses user-list; } } } grouping usm-target-params { container usm { description "User-based SNMPv3 parameters type. Represents snmpTargetParamsMPModel '3' and snmpTargetParamsSecurityModel '3'."; leaf user-name { type snmp:security-name; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetParamsSecurityName"; } leaf security-level { type snmp:security-level; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetParamsSecurityLevel"; } } } augment /snmp:snmp/snmp:target-params/snmp:params { case usm { uses usm-target-params; } } } <CODE ENDS> 4.11. Submodule 'ietf-snmp-tsm' <CODE BEGINS> file "ietf-snmp-tsm.yang" submodule ietf-snmp-tsm { belongs-to ietf-snmp { prefix snmp; } include ietf-snmp-common; include ietf-snmp-target; include ietf-snmp-proxy; organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; contact "WG Web: <http://tools.ietf.org/wg/netmod/> WG List: <mailto:netmod@ietf.org> WG Chair: Thomas Nadeau <mailto:tnadeau@lucidvision.com> WG Chair: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de> Editor: Martin Bjorklund <mailto:mbj@tail-f.com> Editor: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de>"; description "This submodule contains a collection of YANG definitions for configuring the Transport Security Model (TSM) of SNMP. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 7407; see the RFC itself for full legal notices."; reference "RFC 5591: Transport Security Model for the Simple Network Management Protocol (SNMP)"; revision 2014-12-10 { description "Initial revision."; reference "RFC 7407: A YANG Data Model for SNMP Configuration"; } feature tsm { description "A server implements this feature if it supports the Transport Security Model for SNMP."; reference "RFC 5591: Transport Security Model for the Simple Network Management Protocol (SNMP)"; } augment /snmp:snmp { if-feature tsm; container tsm { description "Configuration of the Transport Security Model."; leaf use-prefix { type boolean; default false; reference "RFC 5591: Transport Security Model for the Simple Network Management Protocol (SNMP). SNMP-TSM-MIB.snmpTsmConfigurationUsePrefix"; } } } grouping tsm-target-params { container tsm { description "Transport-based security SNMPv3 parameters type. Represents snmpTargetParamsMPModel '3' and snmpTargetParamsSecurityModel '4'."; leaf security-name { type snmp:security-name; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetParamsSecurityName"; } leaf security-level { type snmp:security-level; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetParamsSecurityLevel"; } } } augment /snmp:snmp/snmp:target-params/snmp:params { if-feature tsm; case tsm { uses tsm-target-params; } } } <CODE ENDS> 4.12. Submodule 'ietf-snmp-tls' <CODE BEGINS> file "ietf-snmp-tls.yang" submodule ietf-snmp-tls { belongs-to ietf-snmp { prefix snmp; } import ietf-inet-types { prefix inet; } import ietf-x509-cert-to-name { prefix x509c2n; } include ietf-snmp-common; include ietf-snmp-engine; include ietf-snmp-target; organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; contact "WG Web: <http://tools.ietf.org/wg/netmod/> WG List: <mailto:netmod@ietf.org> WG Chair: Thomas Nadeau <mailto:tnadeau@lucidvision.com> WG Chair: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de> Editor: Martin Bjorklund <mailto:mbj@tail-f.com> Editor: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de>"; description "This submodule contains a collection of YANG definitions for configuring the Transport Layer Security Transport Model (TLSTM) of SNMP. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 7407; see the RFC itself for full legal notices."; reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)"; revision 2014-12-10 { description "Initial revision."; reference "RFC 7407: A YANG Data Model for SNMP Configuration"; } feature tlstm { description "A server implements this feature if it supports the Transport Layer Security Transport Model for SNMP."; reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)"; } augment /snmp:snmp/snmp:engine/snmp:listen/snmp:transport { if-feature tlstm; case tls { container tls { description "A list of IPv4 and IPv6 addresses and ports to which the engine listens for SNMP messages over TLS."; leaf ip { type inet:ip-address; mandatory true; description "The IPv4 or IPv6 address on which the engine listens for SNMP messages over TLS."; } leaf port { type inet:port-number; description "The TCP port on which the engine listens for SNMP messages over TLS. If the port is not configured, an engine that acts as a Command Responder uses port 10161, and an engine that acts as a Notification Receiver uses port 10162."; } } } case dtls { container dtls { description "A list of IPv4 and IPv6 addresses and ports to which the engine listens for SNMP messages over DTLS."; leaf ip { type inet:ip-address; mandatory true; description "The IPv4 or IPv6 address on which the engine listens for SNMP messages over DTLS."; } leaf port { type inet:port-number; description "The UDP port on which the engine listens for SNMP messages over DTLS. If the port is not configured, an engine that acts as a Command Responder uses port 10161, and an engine that acts as a Notification Receiver uses port 10162."; } } } } augment /snmp:snmp { if-feature tlstm; container tlstm { uses x509c2n:cert-to-name { description "Defines how certificates are mapped to names. The resulting name is used as a security name."; refine cert-to-name/map-type { description "Mappings that use the snmpTlstmCertToTSNData column need to augment the cert-to-name list with additional configuration objects corresponding to the snmpTlstmCertToTSNData value. Such objects should use the 'when' statement to make them conditional based on the map-type."; } } } } grouping tls-transport { leaf ip { type inet:host; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetAddrTAddress RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.SnmpTLSAddress"; } leaf port { type inet:port-number; default 10161; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetAddrTAddress RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.SnmpTLSAddress"; } leaf client-fingerprint { type x509c2n:tls-fingerprint; reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.snmpTlstmParamsClientFingerprint"; } leaf server-fingerprint { type x509c2n:tls-fingerprint; reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.snmpTlstmAddrServerFingerprint"; } leaf server-identity { type snmp:admin-string; reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.snmpTlstmAddrServerIdentity"; } } augment /snmp:snmp/snmp:target/snmp:transport { if-feature tlstm; case tls { reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.snmpTLSTCPDomain"; container tls { uses tls-transport; } } } augment /snmp:snmp/snmp:target/snmp:transport { if-feature tlstm; case dtls { reference "RFC 6353: Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP). SNMP-TLS-TM-MIB.snmpDTLSUDPDomain"; container dtls { uses tls-transport; } } } } <CODE ENDS> 4.13. Submodule 'ietf-snmp-ssh' <CODE BEGINS> file "ietf-snmp-ssh.yang" submodule ietf-snmp-ssh { belongs-to ietf-snmp { prefix snmp; } import ietf-inet-types { prefix inet; } include ietf-snmp-common; include ietf-snmp-engine; include ietf-snmp-target; organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; contact "WG Web: <http://tools.ietf.org/wg/netmod/> WG List: <mailto:netmod@ietf.org> WG Chair: Thomas Nadeau <mailto:tnadeau@lucidvision.com> WG Chair: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de> Editor: Martin Bjorklund <mailto:mbj@tail-f.com> Editor: Juergen Schoenwaelder <mailto:j.schoenwaelder@jacobs-university.de>"; description "This submodule contains a collection of YANG definitions for configuring the Secure Shell Transport Model (SSHTM) of SNMP. Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 7407; see the RFC itself for full legal notices."; reference "RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)"; revision 2014-12-10 { description "Initial revision."; reference "RFC 7407: A YANG Data Model for SNMP Configuration"; } feature sshtm { description "A server implements this feature if it supports the Secure Shell Transport Model for SNMP."; reference "RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)"; } augment /snmp:snmp/snmp:engine/snmp:listen/snmp:transport { if-feature sshtm; case ssh { container ssh { description "The IPv4 or IPv6 address and port to which the engine listens for SNMP messages over SSH."; leaf ip { type inet:ip-address; mandatory true; description "The IPv4 or IPv6 address on which the engine listens for SNMP messages over SSH."; } leaf port { type inet:port-number; description "The TCP port on which the engine listens for SNMP messages over SSH. If the port is not configured, an engine that acts as a Command Responder uses port 5161, and an engine that acts as a Notification Receiver uses port 5162."; } } } } augment /snmp:snmp/snmp:target/snmp:transport { if-feature sshtm; case ssh { reference "RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP). SNMP-SSH-TM-MIB.snmpSSHDomain"; container ssh { leaf ip { type inet:host; mandatory true; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetAddrTAddress RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP). SNMP-SSH-TM-MIB.SnmpSSHAddress"; } leaf port { type inet:port-number; default 5161; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetAddrTAddress RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP). SNMP-SSH-TM-MIB.SnmpSSHAddress"; } leaf username { type string; reference "RFC 3413: Simple Network Management Protocol (SNMP). Applications. SNMP-TARGET-MIB.snmpTargetAddrTAddress RFC 5592: Secure Shell Transport Model for the Simple Network Management Protocol (SNMP). SNMP-SSH-TM-MIB.SnmpSSHAddress"; } } } } } <CODE ENDS> 5. IANA Considerations This document registers two URIs in the "IETF XML Registry" [RFC3688]. Following the format in RFC 3688, the following registrations have been made. URI: urn:ietf:params:xml:ns:yang:ietf-snmp Registrant Contact: The NETMOD WG of the IETF. XML: N/A, the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name Registrant Contact: The NETMOD WG of the IETF. XML: N/A, the requested URI is an XML namespace. This document registers the following YANG modules in the "YANG Module Names" registry [RFC6020]. name: ietf-snmp namespace: urn:ietf:params:xml:ns:yang:ietf-snmp prefix: snmp reference: RFC 7407 name: ietf-x509-cert-to-name namespace: urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name prefix: x509c2n reference: RFC 7407 The document registers the following YANG submodules in the "YANG Module Names" registry [RFC6020]. name: ietf-snmp-common parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-engine parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-community parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-notification parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-target parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-vacm parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-usm parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-tsm parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-tls parent: ietf-snmp reference: RFC 7407 name: ietf-snmp-ssh parent: ietf-snmp reference: RFC 7407 6. Security Considerations The YANG module and submodules defined in this memo are designed to be accessed via the NETCONF protocol [RFC6241]. The lowest NETCONF layer is the secure transport layer and the mandatory to implement secure transport is SSH [RFC6242]. The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF users to a pre-configured subset of all available NETCONF protocol operations and content. There are a number of data nodes defined in the YANG module and submodules which are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability: o The "/snmp/engine" subtree contains the configuration of general parameters of an SNMP engine such as the endpoints to listen on, the transports and SNMP versions enabled, or the engine's identity. Write access to this subtree should only be granted to entities configuring general SNMP engine parameters. o The "/snmp/target" subtree contains the configuration of SNMP targets and, in particular, which transports to use and their security parameters. Write access to this subtree should only be granted to the security administrator and entities configuring SNMP notification forwarding behavior. o The "/snmp/notify" and "/snmp/notify-filter-profile" subtrees contain the configuration for the SNMP notification forwarding and filtering mechanism. Write access to these subtrees should only be granted to entities configuring SNMP notification forwarding behavior. o The "/snmp/proxy" subtree contains the configuration for SNMP proxies. Write access to this subtree should only be granted to entities configuring SNMP proxies. o The "/snmp/community" subtree contains the configuration of the Community-based Security Model. Write access to this subtree should only be granted to the security administrator. o The "/snmp/usm" subtree contains the configuration of the User- based Security Model. Write access to this subtree should only be granted to the security administrator. o The "/snmp/tsm" subtree contains the configuration of the Transport Layer Security (TLS) Transport Model for SNMP. Write access to this subtree should only be granted to the security administrator. o The "/snmp/tlstm" subtree contains the configuration of the SNMP transport over (D)TLS and, in particular, the configuration of how certificates are mapped to SNMP security names. Write access to this subtree should only be granted to the security administrator. o The "/snmp/vacm" subtree contains the configuration of the View- based Access Control Model used by SNMP to authorize access to management information via SNMP. Write access to this subtree should only be granted to the security administrator. Some of the readable data nodes in the YANG module and submodules may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get- config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability: o The "/snmp/engine" subtree exposes general information about an SNMP engine such as which version(s) of SNMP are enabled or which transports are enabled. o The "/snmp/target" subtree exposes information about which transports are used to reach certain SNMP targets and which transport-specific parameters are used. o The "/snmp/notify" and "/snmp/notify-filter-profile" subtrees expose information about how notifications are filtered and forwarded to notification targets. o The "/snmp/proxy" subtree exposes information about proxy relationships. o The "/snmp/community", "/snmp/usm", "/snmp/tsm", "/snmp/tlstm", and "/snmp/vacm" subtrees are specifically sensitive since they expose information about the authentication and authorization policy used by an SNMP engine. Changes to the SNMP access control rules should be done in an atomic way (through a single edit-config or a single commit), or care must be taken that they are done in a sequence that does not temporarily open access to resources. Implementations supporting SNMP write access must ensure that any SNMP access control rule changes over NETCONF are also atomic to the SNMP instrumentation. In particular, changes involving an internal delete/create cycle (e.g., to move a user to a different group) must be done with sufficient protections such that even a power fail immediately after the delete does not leave the administrator locked out. Security administrators need to ensure that NETCONF access control rules and SNMP access control rules implement a consistent security policy. Specifically, the SNMP access control rules should prevent accidental leakage of sensitive security parameters such as community strings. See the Security Considerations section of [RFC3584] for further details. 7. References 7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, October 2010, <http://www.rfc-editor.org/info/rfc6020>. [RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J., and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, June 2011, <http://www.rfc-editor.org/info/rfc6241>. [RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, June 2011, <http://www.rfc-editor.org/info/rfc6242>. [RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", RFC 6536, March 2012, <http://www.rfc-editor.org/info/rfc6536>. [RFC6991] Schoenwaelder, J., "Common YANG Data Types", RFC 6991, July 2013, <http://www.rfc-editor.org/info/rfc6991>. 7.2. Informative References [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002, <http://www.rfc-editor.org/info/rfc3411>. [RFC3412] Case, J., Harrington, D., Presuhn, R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3412, December 2002, <http://www.rfc-editor.org/info/rfc3412>. [RFC3413] Levi, D., Meyer, P., and B. Stewart, "Simple Network Management Protocol (SNMP) Applications", STD 62, RFC 3413, December 2002, <http://www.rfc-editor.org/info/rfc3413>. [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, December 2002, <http://www.rfc-editor.org/info/rfc3414>. [RFC3415] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3415, December 2002, <http://www.rfc-editor.org/info/rfc3415>. [RFC3417] Presuhn, R., "Transport Mappings for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3417, December 2002, <http://www.rfc-editor.org/info/rfc3417>. [RFC3418] Presuhn, R., "Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3418, December 2002, <http://www.rfc-editor.org/info/rfc3418>. [RFC3419] Daniele, M. and J. Schoenwaelder, "Textual Conventions for Transport Addresses", RFC 3419, December 2002, <http://www.rfc-editor.org/info/rfc3419>. [RFC3584] Frye, R., Levi, D., Routhier, S., and B. Wijnen, "Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework", BCP 74, RFC 3584, August 2003, <http://www.rfc-editor.org/info/rfc3584>. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004, <http://www.rfc-editor.org/info/rfc3688>. [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, June 2004, <http://www.rfc-editor.org/info/rfc3826>. [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 5591, June 2009, <http://www.rfc-editor.org/info/rfc5591>. [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, June 2009, <http://www.rfc-editor.org/info/rfc5592>. [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 6353, July 2011, <http://www.rfc-editor.org/info/rfc6353>. [RFC6643] Schoenwaelder, J., "Translation of Structure of Management Information Version 2 (SMIv2) MIB Modules to YANG Modules", RFC 6643, July 2012, <http://www.rfc-editor.org/info/rfc6643>. Appendix A. Example Configurations A.1. Engine Configuration Example Below is an XML instance document showing a configuration of an SNMP engine listening on UDP port 161 on IPv4 and IPv6 endpoints and accepting SNMPv2c and SNMPv3 messages. <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <engine> <enabled>true</enabled> <listen> <name>all-ipv4-udp</name> <udp> <ip>0.0.0.0</ip> <port>161</port> </udp> </listen> <listen> <name>all-ipv6-udp</name> <udp> <ip>::</ip> <port>161</port> </udp> </listen> <version> <v2c/> <v3/> </version> <engine-id>80:00:02:b8:04:61:62:63</engine-id> </engine> </snmp> A.2. Community Configuration Example Below is an XML instance document showing a configuration that maps the community name "public" to the security-name "community-public" on the local engine with the default context name. The target tag "community-public-access" filters the access to this community name. <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <community> <index>1</index> <text-name>public</text-name> <security-name>community-public</security-name> <target-tag>community-public-access</target-tag> </community> <target> <name>management-station</name> <udp> <ip>2001:db8::abcd</ip> <port>161</port> </udp> <tag>blue</tag> <tag>community-public-access</tag> <target-params>v2c-public</target-params> </target> <target-params> <name>v2c-public</name> <v2c> <security-name>community-public</security-name> </v2c> </target-params> </snmp> A.3. User-Based Security Model Configuration Example Below is an XML instance document showing the configuration of a local user "joey" who has no authentication or privacy keys. For the remote SNMP engine identified by the snmpEngineID '800002b804616263'H, two users are configured. The user "matt" has a localized SHA authentication key, and the user "russ" has a localized SHA authentication key and an AES encryption key. <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <usm> <local> <user> <name>joey</name> </user> </local> <remote> <engine-id>00:00:00:00:00:00:00:00:00:00:00:02</engine-id> <user> <name>matt</name> <auth> <sha> <!-- The 'key' value is split into two lines to conform to the RFC formatting rules. --> <key>66:95:fe:bc:92:88:e3:62:82:23: 5f:c7:15:1f:12:84:97:b3:8f:3f</key> </sha> </auth> </user> <user> <name>russ</name> <auth> <sha> <!-- The 'key' value is split into two lines to conform to the RFC formatting rules. --> <key>66:95:fe:bc:92:88:e3:62:82:23: 5f:c7:15:1f:12:84:97:b3:8f:3f</key> </sha> </auth> <priv> <aes> <!-- The 'key' value is split into two lines to conform to the RFC formatting rules. --> <key>66:95:fe:bc:92:88:e3:62:82:23: 5f:c7:15:1f:12:84</key> </aes> </priv> </user> </remote> </usm> <target> <name>bluebox</name> <udp> <ip>2001:db8::abcd</ip> <port>161</port> </udp> <tag>blue</tag> <target-params>matt-auth</target-params> </target> <target-params> <name>matt-auth</name> <usm> <user-name>matt</user-name> <security-level>auth-no-priv</security-level> </usm> </target-params> </snmp> A.4. Target and Notification Configuration Example Below is an XML instance document showing the configuration of a notification generator application (see Appendix A of [RFC3413]). Note that the USM-specific objects are defined in the "ietf-snmp-usm" submodule. <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <target> <name>addr1</name> <udp> <ip>192.0.2.3</ip> <port>162</port> </udp> <tag>group1</tag> <target-params>joe-auth</target-params> </target> <target> <name>addr2</name> <udp> <ip>192.0.2.6</ip> <port>162</port> </udp> <tag>group1</tag> <target-params>joe-auth</target-params> </target> <target> <name>addr3</name> <udp> <ip>192.0.2.9</ip> <port>162</port> </udp> <tag>group2</tag> <target-params>bob-priv</target-params> </target> <target-params> <name>joe-auth</name> <usm> <user-name>joe</user-name> <security-level>auth-no-priv</security-level> </usm> </target-params> <target-params> <name>bob-priv</name> <usm> <user-name>bob</user-name> <security-level>auth-priv</security-level> </usm> </target-params> <notify> <name>group1</name> <tag>group1</tag> <type>trap</type> </notify> <notify> <name>group2</name> <tag>group2</tag> <type>trap</type> </notify> </snmp> A.5. Proxy Configuration Example Below is an XML instance document showing the configuration of a proxy forwarder application. It proxies SNMPv2c messages from command generators to a file server running an SNMPv1 agent that recognizes two community strings, "private" and "public", with different associated read views. The file server is represented as two "target" instances, one for each community string. If the proxy receives an SNMPv2c message with the community string "public" from a device in the "Office Network" or "Home Office Network", it gets tagged as "trusted", and the proxy uses the "private" community string when sending the message to the file server. Other SNMPv2c messages with the community string "public" get tagged as "non-trusted", and the proxy uses the "public" community string for these messages. There is also a special "backdoor" community string that can be used from any location to get "trusted" access. The "Office Network" and "Home Office Network" are represented as two "target" instances. These "target" instances have target-params "none", which refers to a non-existing target-params entry. <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <target> <name>File Server (private)</name> <udp> <ip>192.0.2.1</ip> </udp> <target-params>v1-private</target-params> </target> <target> <name>File Server (public)</name> <udp> <ip>192.0.2.1</ip> </udp> <target-params>v1-public</target-params> </target> <target> <name>Office Network</name> <udp> <ip>192.0.2.0</ip> <prefix-length>24</prefix-length> </udp> <tag>office</tag> <target-params>none</target-params> </target> <target> <name>Home Office Network</name> <udp> <ip>203.0.113.0</ip> <prefix-length>24</prefix-length> </udp> <tag>home-office</tag> <target-params>none</target-params> </target> <target-params> <name>v1-private</name> <v1> <security-name>private</security-name> </v1> </target-params> <target-params> <name>v1-public</name> <v1> <security-name>public</security-name> </v1> </target-params> <target-params> <name>v2c-public</name> <v2c> <security-name>public</security-name> </v2c> </target-params> <!-- Communities c1, c2, c3, and c4 are used for incoming messages that should be forwarded. Communities c3 and c5 are used for outgoing messages to the file server. --> <community> <index>c1</index> <security-name>public</security-name> <engine-id>80:00:61:81:c8</engine-id> <context>trusted</context> <target-tag>office</target-tag> </community> <community> <index>c2</index> <security-name>public</security-name> <engine-id>80:00:61:81:c8</engine-id> <context>trusted</context> <target-tag>home-office</target-tag> </community> <community> <index>c3</index> <security-name>public</security-name> <engine-id>80:00:61:81:c8</engine-id> <context>not-trusted</context> </community> <community> <index>c4</index> <text-name>backdoor</text-name> <security-name>public</security-name> <engine-id>80:00:61:81:c8</engine-id> <context>trusted</context> </community> <community> <index>c5</index> <security-name>private</security-name> <engine-id>80:00:61:81:c8</engine-id> <context>trusted</context> </community> <proxy> <name>p1</name> <type>read</type> <context-engine-id>80:00:61:81:c8</context-engine-id> <context-name>trusted</context-name> <target-params-in>v2c-public</target-params-in> <single-target-out>File Server (private)</single-target-out> </proxy> <proxy> <name>p2</name> <type>read</type> <context-engine-id>80:00:61:81:c8</context-engine-id> <context-name>not-trusted</context-name> <target-params-in>v2c-public</target-params-in> <single-target-out>File Server (public)</single-target-out> </proxy> </snmp> If an SNMPv2c Get request with community string "public" is received from an IP address tagged as "office" or "home-office", or if the request is received from anywhere else with community string "backdoor", the implied context is "trusted" so proxy entry "p1" matches. The request is forwarded to the file server as SNMPv1 with community "private" using community table entry "c5" for outbound params lookup. If an SNMPv2c Get request with community string "public" is received from any other IP address, the implied context is "not-trusted" so proxy entry "p2" matches, and the request is forwarded to the file server as SNMPv1 with community "public". A.6. View-Based Access Control Model Configuration Example Below is an XML instance document showing the minimum-secure VACM configuration (see Appendix A of [RFC3415]). <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <vacm> <group> <name>initial</name> <member> <security-name>initial</security-name> <security-model>usm</security-model> </member> <access> <context></context> <security-model>usm</security-model> <security-level>no-auth-no-priv</security-level> <read-view>restricted</read-view> <notify-view>restricted</notify-view> </access> <access> <context></context> <security-model>usm</security-model> <security-level>auth-no-priv</security-level> <read-view>internet</read-view> <write-view>internet</write-view> <notify-view>internet</notify-view> </access> </group> <view> <name>initial</name> <include>1.3.6.1</include> </view> <view> <name>restricted</name> <include>1.3.6.1</include> </view> </vacm> </snmp> The following XML instance document shows the semi-secure VACM configuration (only the view configuration is different). <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp"> <vacm> <group> <name>initial</name> <member> <security-name>initial</security-name> <security-model>usm</security-model> </member> <access> <context></context> <security-model>usm</security-model> <security-level>no-auth-no-priv</security-level> <read-view>restricted</read-view> <notify-view>restricted</notify-view> </access> <access> <context></context> <security-model>usm</security-model> <security-level>auth-no-priv</security-level> <read-view>internet</read-view> <write-view>internet</write-view> <notify-view>internet</notify-view> </access> </group> <view> <name>initial</name> <include>1.3.6.1</include> </view> <view> <name>restricted</name> <include>1.3.6.1.2.1.1</include> <include>1.3.6.1.2.1.11</include> <include>1.3.6.1.6.3.10.2.1</include> <include>1.3.6.1.6.3.11.2.1</include> <include>1.3.6.1.6.3.15.1.1</include> </view> </vacm> </snmp> A.7. Transport Layer Security Transport Model Configuration Example Below is an XML instance document showing the configuration of the mapping of certificate to security name (see Appendices A.2 and A.3 of [RFC6353]). <snmp xmlns="urn:ietf:params:xml:ns:yang:ietf-snmp" xmlns:x509c2n= "urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name"> <tlstm> <cert-to-name> <id>1</id> <fingerprint>11:0A:05:11:00</fingerprint> <map-type>x509c2n:san-any</map-type> </cert-to-name> <cert-to-name> <id>2</id> <fingerprint>11:0A:05:11:00</fingerprint> <map-type>x509c2n:specified</map-type> <name> Joe Cool </name> </cert-to-name> </tlstm> </snmp> Acknowledgments The authors want to thank Wes Hardaker and David Spakes for their detailed reviews. Additional valuable comments were provided by David Harrington, Borislav Lukovic, and Randy Presuhn. Juergen Schoenwaelder was partly funded by Flamingo, a Network of Excellence project (ICT-318488) supported by the European Commission under its Seventh Framework Programme. Authors' Addresses Martin Bjorklund Tail-f Systems EMail: mbj@tail-f.com Juergen Schoenwaelder Jacobs University EMail: j.schoenwaelder@jacobs-university.de